Silverfish Battery 10Ah 13Ah 15Ah 500W 1000W E-Bike 36V Li-Ion E-Bike Battery
High-quality lithium-ion battery
This Silverfish electric bike lithium-ion battery is designed for electric bikes equipped with 0~1000w motors. Silverfish electric bikes use 18650 battery cells and are equipped with BMS. Silverfish electric bikes can be equipped with a charger that does not exceed 5A. It provides reliable power and long-lasting performance for your electric bike riding. High-quality batteries guarantee a stable and continuous supply of energy, allowing you to enjoy longer rides without worrying about battery exhaustion.
Extremely long battery life
Upgrade your electric bike with our 18650/21700 battery pack and maximize the mileage of every ride. With its impressive capacity and advanced technology, the Silverfish electric bike provides the versatility to handle any terrain with ease. Enjoy the convenience of a long-lasting battery that lets you go farther and faster, and have the confidence of knowing you have reliable power to support you.
Silverfish electric bicycle main parameters
| Product Name |
Silverfish lithium battery |
| Charger current |
2-5A |
| Charging time |
3-8hours |
| Motor power |
0-1000w |
| Cycle Life |
≥1000 times (80% capacity retention) |
| Apllication |
E-bicycle E-scooter |
| BMS Function |
Over-Current .Over-Discharge ,
Over-Charge ,Short-Circuit Protection, Balance act |
| Charge operating temperature |
0-45℃ |
| Discharge operating temperature |
-10-60℃ |
Installation steps of silverfish lithium battery
1. Use screws to install the battery holder onto the bicycle.
2. Install the battery pack onto the battery holder.
3. Connect the battery converter to the bicycle controller.
4. Turn on the battery power andConfirm if the battery is functioning properly.
Detail display of silverfish lithium battery
battery indicator
1 Red 3 Green ---100%
1 Red 2 Green -75% Red 1 Green -50%
1 Red 0 Green ---25%
charge socket
The charging current of this socket cannot exceed amperes
Discharge socket
Connect the discharge wire to the power cord of the electric bicycle controller. The red wire represents the positive pole, and the black wire represents the negative pole
Notes
Please send us a photo of the previous battery shape, or you can also tell us the size of the battery.
The discharge port needs to be photographed to confirm the model
Make sure the voltage is consistent and the voltage is not mixed.
Check whether the battery body has a voltage mark.
If the battery body can confirm the voltage, buy it.
If the voltage cannot be confirmed. If the battery body has no label, please take a picture of the parameters on the back of the charger and send it to us, and our engineer will confirm it.
If the battery body has no label or is missing, and there is no charger. You need to check the controller and send us the controller parameters
Product Tags:
|
|
E-Bike Silverfish Battery 36V 10Ah 13Ah 15Ah 500W 1000W Li-Ion Ebike Battery Images
|
